• img1
  • img2
  • img3

Refractory Castables





Castable refractory are manufactured by high quality graded refractory material to provide high strength, high Refractories, to make desired shapes also used for patching, repairing of furnace, casting baffles for boilers, covering & casting of furnace doors & headers etc.

Sr. No. Particulars Alfacast HHD Alfacast Super Alfasil Alfasil - K Alfasil - C
1) Service Temp.oC (max) 1300 1450 1450 1500 - 1600 1500
2) Al2O3(min) 45 % 55 % 60 % 65 % 58 %
3) Fe2O3(max) 4 % 3 % 3 % 2 % 2.5 %
4) Density kg/m3 (min) 2100 2200 2500 2250 2050
5) Cold Crushing Strength kg/cm2 110oC 400 340 400 350 350
6) Max Grain Size 6 to 8 * 6 to 8 * 6 * 6 * 6 *
7) Packing 50 kg bag 50 kg bag 50 kg bag 50 kg bag 50 kg bag
Desired grain size can be supplied as per customer request.
Note : Above test data on a average basis & subject to change.
Mix castable with clean water on non absorbe surface: If the amount of castable required in large quantity it is advisable that the concrete mixer should be used. Setting takes place immediately after addition of water & ready for use at 24 hr. It sets at room temperature and continuous water sprinkling or covering of cast material with wet gunny cloth is necessary for 15 to 20 hrs to prevent from cracking.


Refractory Engineering Services :

  • Refractory brick lining work as per your specification & drawings of Low & high pressure boilers. Modification & upgradation to increase the efficiency of the boiler & heat loss problems.
  • Refractory brick lining work of all type of Industrial furnaces.
  • Refractory designing for new boilers & furnaces.
  • We also under take boiler Chimney construction & refractory lining.